Factory-direct system windows, sliding doors and outdoor living, engineered for architects, developers, and distributors in 40+ countries.
Zenic Window & Door Technology Co., Ltd. operates from Foshan, the center of China's aluminum extrusion and fenestration supply chain. For more than 15 years, our engineering team has converted architectural drawings into tested, fully assembled window and door units. Every unit is shipped glazed, hardware-fitted and crated to your port.
Continuous production of aluminum system fenestration since our founding.
Across North America, Europe, the Middle East, Oceania and Asia.
CNC cutting, corner crimping, glazing and QC under one roof.
Engineers, drafters, fabricators and export project coordinators.
Three engineered series cover residential, hospitality, and commercial projects. The range runs from slim-line casements to panoramic sliding walls and bioclimatic pergolas.
Casement, top-hung, tilt and turn, sliding, and smart lift windows. Frame depths range from 65 to 150 mm to match each climate zone and energy code.
Heavy-duty sliding, folding, hinged, and French doors. All are fitted with multi-point locking and high-load rollers for large, secure openings.
Motorized aluminum louver pergolas and architectural shading. They are designed for villas, resorts, and commercial terraces in hot or coastal climates.
These are the three systems most specified by our overseas buyers. Every profile is made to order in custom sizes, RAL colors, and glass configurations.
Uses multi-chamber 6063-T5 profiles with polyamide thermal strips and three EPDM seal lines. It suits cold-climate residential and mid-rise façades.
Features narrow sightlines with concealed drainage and stainless roller tracks. It is optimized for apartments, hotels, and humid coastal zones.
A heavy-duty lift-and-slide system for large glazed walls. It combines a flush threshold option, multi-point locking, and high wind-load resistance.
Every window and door passes through a documented quality chain built for international project specifications, from raw aluminum billet to the finished, glazed frame.
We use prime alloy only and never recycled scrap. Multi-chamber profiles with 2.0 mm structural walls provide consistent wind-load resistance and a stable surface for coating.
EPDM continuous gaskets and polyamide thermal break frames reduce condensation risk and deliver U-values down to 1.1 W/m²K.
Imported multi-point locks and high-load hinges are rated for 60 kg sashes and 1,000 N wind pressure. All hardware carries a 10-year warranty.
Pin-and-glue corner joints and pressure-equalized concealed drainage keep frames watertight, rigid, and visually clean for decades.
EPE foam, corner guards, and fumigation-free plywood crates protect finished units on their journey from Foshan to your job site.
We offer custom profile dies, RAL and wood-grain finishes, private labeling, and hardware selection. You get your brand, backed by our manufacturing depth.
Our production base spans nearly 20,000 m² in Foshan. It runs CNC cutting centers, automated corner crimping, in-house glazing lines, and a multi-stage quality gate before any unit is crated.
Engineers check your window schedule and elevations for wind load, glass thickness, and code compliance. They then issue shop drawings for approval.
Profiles are extruded and receive powder coating, anodizing, or wood-grain transfer. Each batch has recorded coating thickness and color matching.
CNC cutting, corner crimping, gasket insertion, IGU glazing, and hardware fitting take place in a controlled indoor environment.
Every unit is inspected, labeled by opening number, crated, and loaded FOB Foshan or Shenzhen with full export documents.
This quick reference helps procurement and design teams confirm fit before requesting shop drawings. Final values depend on system series, glass unit, and opening size.
| Parameter | Specification | Why It Matters for Buyers |
|---|---|---|
| Aluminum Alloy | 6063-T5 prime alloy, 2.0 mm walls | Provides structural stiffness, finish consistency, and long-term corrosion resistance. |
| Frame Depth | 65–150 mm | Lets you match thermal and acoustic targets to each climate zone. |
| Thermal Performance | U-value down to 1.1 W/m²K | Supports energy code compliance and lower HVAC loads. |
| Sealing | Three-layer, six-seal EPDM continuous gaskets | Improves air and water tightness in high wind and rain zones. |
| Hardware | 200,000 cycles, 60 kg sash, 1,000 N wind pressure | Reduces maintenance and warranty risk for developers. |
| MOQ / Lead Time | From 50 pcs / from 15 days | Suits both pilot orders and phased project deliveries. |
| Trade Terms | FOB Foshan / Shenzhen | Gives access to South China's main container ports. |
Our product lines are tested against the standards required in key export markets, and a quality management system governs production.
Certification scope varies by product series. Test reports for specific systems are available on request for project submittals.
Finished units travel from our Foshan factory to project sites worldwide. We ship FOB Foshan or Shenzhen with lead times from 15 days.
Specified with NFRC · AAMA · CSA-tested systems for USA and Canada projects.
CE-marked tilt and turn and casement windows for low-energy residential projects.
Heat-resistant and sand-sealed sliding systems for Gulf towers and villas.
AS2047-rated panoramic doors for coastal homes in Australia.
"The shop drawings came back with engineering notes we had not even asked for, including wind load and glass thickness per opening. Installation on site was straightforward because every unit was labeled by position."
"We needed thermal break casements that could handle Gulf heat and dust. The six-seal gasket system and concealed drainage have performed well through two summers without leakage complaints."
"As a distributor, private labeling and consistent RAL color batches matter most to us. Crating quality is excellent, and our last three containers arrived with zero glass breakage."
Our factory engineers wrote these guides to help importers and specifiers compare aluminum systems with confidence.
Sand, heat, and humidity call for specific profiles, glazing, and drainage. This guide covers what to look for when specifying aluminum windows in the Gulf.
NFRC labels can look cryptic. Here is a plain-language breakdown of the numbers that matter for energy performance.
Polyamide thermal breaks keep cold outside, reduce condensation, and cut HVAC loads. This guide explains how they work in buildings of every size.
Our MOQ starts from 50 pieces per project. You can combine different window and door types in one order to reach the MOQ, which works well for pilot projects and showroom stock.
Standard lead times start from 15 days after shop drawing approval and deposit. The exact schedule depends on quantity, surface finish, and glass configuration. Goods ship FOB Foshan or Shenzhen.
Our systems reach U-values as low as 1.1 W/m²K. The result depends on frame depth (65–150 mm), polyamide strip width, and the insulated glass unit, whether double or triple glazed with Low-E coating and warm-edge spacers.
Yes. We support custom profile dies, RAL powder coating, anodized and wood-grain finishes, private-label branding, and hardware brand selection for distributors, developers, and contractors.
Depending on the series and target market, our products are tested or certified to NFRC, CE, CSA, AS2047, AAMA, ISO 9001, Intertek, and ENERGY STAR programs. We provide series-specific test reports for project submittals.
Share your window schedule or elevations. You will receive technical recommendations, MOQ confirmation, and a production timeline tailored to your project.
Email · [email protected]